Progressive Nitrous Flow Calibration
Liguori Drag Racing • Nitrous
Progressive Nitrous Flow Calibration
See how much nitrous actually flows at each controller setting you tested.
50% on your controller may not deliver 50% of the nitrous. Enter your measured test results below to see how your setup responds.
What do I enter?
- Controller setting: the percentage used for that test.
- Nitrous used: bottle weight before the test minus bottle weight after it.
- Test length: how many seconds the nitrous flowed.
Include a test at 100% controller setting. This is your full-flow reference. Use measurements from the same setup and comparable bottle pressure. Exclude purging or other bottle losses from the measured amount.
2. Your measured nitrous flow
Method and assumptions
Each rate = measured mass loss ÷ test duration. Full-flow fraction = measured rate ÷ rate at 100% duty × 100. The chart and table show your measured tests. Lines connect the points as a visual guide. If no 0% test is entered, a zero-flow starting point is added to the chart only; the table retains your actual measurements.